The Centurion Pro TableTop is one of the best size/efficiency trimmers on the market. This super compact trimmer is synonymous with elegance and high engineering and is designed to be a delicate yet powerful machine, fitting practically anywhere.
Despite its small size, Tabletop Pro can easily replace up to 6 operators without sacrificing quality, and is able to work with both fresh and dried flowers, harvesting up to 3.1 kg/h for the dry product version and up to 15.8 kg/h for the one set for fresh flowers.

Despite its name, the Centurion Pro mini is not a "small" machine, this trimmer is today one of the most requested on the market being a miniaturized version of the Centurion Pro Original but still powerful enough, guaranteeing well 25,000 cuts per minute, with a processing capacity of 3\6 kg per hour (22-27 kg wet), it is able to replace 15 operators
Its  components made entirely of anodized aluminum and stainless steel, making it quite light and resistant.
The Centurion Pro Mini comes with the standard Toro hardened steel cutting rotor, which features 11 blades of the highest quality and is coated with non-stick Quantanium, in addition, the hardened blade bar ensures that the machine has a clean and precise cut and that it works at a high rate

The Centurion Pro Original trimmer is one of the  best-selling and most requested industrial machines on the market. With its anodized aluminum and stainless steel components, this trimmer is as robust as it is powerful, and is perfect for medium/large size with its capacity to replace 25 operators.
This machine works with both fresh and dried flowers, harvesting up to 9 kg/h for the product version dry and up to 45 kg/h for that set for fresh flowers. it is perfectly suited to large-scale growers looking to optimize processing times without compromising quality.

The Centurion Pro Gladiator Quantanium is one of the most powerful trimmers in the world for sustainable work volume. It can replace the work of 40 operators without sacrificing quality.
The CenturionPro Gladiator guarantees a good 75,000 cuts per minute and is one of the most requested industrial machines on the market.
With a processing capacity of about 18 Kg per hour (about 70 Kg wet), the CenturionPro Gladiator is nothing more than a perfect industrial machine, capable of replacing 40 operator trimmers, is perfectly suited to large-scale growers looking to optimize processing times without compromising quality.

The Centurion 3.0  is one of the most powerful trimmers in the world for sustainable work volume. It can replace the work of 50 operators without sacrificing quality.
The CenturionPro 3.0 guarantees a good 75,000 cuts per minute and is one of the most powerful industrial machines  in the world.
With a processing capacity of about 20 Kg per hour (about 90 Kg wet), the CenturionPro 3.0  is nothing more than an industrial machine  perfectly suited to large-scale growers who seek to optimize processing times without affecting quality.
Thanks to the 11 hardened steel blades per reel, the Gladiator can produce up to 75,000 cuts per minute. In addition, the hardened blade bar ensures that the machine has a clean and precise cut and works at a high rate.

CenturionPro CG Bucker is defoliator / flower and branch separator can do the job of 2-3 operators and will make over 18 kilos per hour of fully hydrated flowers (8 kg of dried flowers)!
GC1 features a continuous duty cycle and an active gear transmission that allows for greater control and exceptional efficiency, while maintaining high safety.
The GC1 bucker is also equipped with a cleaning system that removes and collects all debris in a vacuum bag, making cleaning a breeze.
The system is easy to install, clean, requires little maintenance and comes with a 2-year warranty.

The Single Bucker Stand HP is a support for the Bucker HP, so you can transport it comfortably since these supports have a system of 4 industrial wheels that facilitate their transport.(locking wheels)
Does not include Bucker

CenturionPro Silver Bullet is one of the most appreciated trimmers by professional producers. Thanks to its high quality components, in anodized aluminum and stainless steel, this trimmer is as robust as it is powerful. It is perfect for large operations with its ability to replace 25 operators without sacrificing end product quality. The CenturionPro Silver Bullet comes with Toro's standard hardened steel cutting rotor, which features 11 of the highest quality blades.
With 40% higher trichome retention and the dual bag system for keif and trim, this machine will help you get the most out of your product.

The Single Bucker Stand GC is a support for the Bucker GC, so you can transport it comfortably since these stands have a system of 4 industrial wheels that facilitate their transport.(locking wheels)
Does not include Bucker

CenturioPro Bucker HP1 (High Performance) is a powerful defoliator / branch and flower separator, offering 5 different sized holes to accept stems up to approximately 1.9cm (3/4"). This powerful model is capable of cut over 175 lbs of fully hydrated flowers per hour (35 lbs of dried flowers) making it very fast and effective, replacing 7 people.
Combined with the high productivity of the CenturionPro cutting machines, you get the harvesting system most powerful in the world!The HP1 comes complete with a 0.75 HP gear motor with variable speed to provide unsurpassed power
Thanks to the variable speed controls, wet or dry product can be processed easily!

The Bucker Gentle Cut Triple is a skinner with a smooth cut. That is, it cuts the flowers off the stems, preventing the flowers from breaking into smaller pieces and keeping the structure of the buds intact, thus preserving the appearance of the flower. The Bucker Gentle Cut Triple has three 0.25hp motors, producing more than 10,000 cuts per minute. It is easy to set up, clean and requires little maintenance.
Produces fresh: 60+ kg/h Produces dry: 12+ kg/h Equivalent to 6-9 people Cuts per minute : 10,000
Comes mounted on a Bucker stand with standard industrial wheels.

The Bucker High Performance Single (HP3) is a high performance machine that uses two rollers that push the stem towards the machine and extract the flowers. This allows the Bucker and Dehorn to be continuously fed more efficiently, resulting in the highest hourly output in the industry. The HP3 is the first three-station defoliator, the HP3 accepts wet or dry stems up to 1.9 cm and can produce over 240 kg / h of completely fresh flower. Made of stainless steel and anodized aluminum, it is robust and easy to maintain. The HP3 comes mounted on a Bucker stand with industrial standard wheels.
This powerful defoliator provides unmatched power, adjustability, control and is easy to set up.

Dal coltivatore amatoriale alle grandi coltivazioni, la serie DBT offre una vasta scelta di modelli per ogni esigenza. DBT Model 1 è il trimmer a secco più conveniente sul mercato, sviluppato specificamente per la raccolta materiale vegetale secco. Con una capacità di taglio a secco fino a 3,6 KG l'ora, il modello DBT 1 è ideale per i coltivatori che necessitano di una macchina in grado di lavorare piccoli raccolti, che desiderano accelerare e i processi produttivi e salvaguardare gli standard.
Tecnologia soft tumble, applica il taglio perfetto, indipendentemente dalle dimensioni, dalla forma o dalla densità del fiore.

From the amateur grower to large crops, the DBT series offers a wide choice of models for every need. DBT Model2 is the dry trimmer more; affordable on the market, developed specifically for harvesting dry plant material. With a capacity; of dry cutting up to 9 KG per hour, the DBT 2 model is capable of dry cutting. ideal for growers who need a machine capable of working medium harvests, who want to speed up production processes and safeguard standards.

Soft tumble technology, applies the perfect cut, regardless of the size, shape or density of the hair. of the flower.

Dal coltivatore amatoriale alle grandi coltivazioni, la serie DBT offre una vasta scelta di modelli per ogni esigenza. DBT Model3 è il trimmer a secco più conveniente sul mercato, sviluppato specificamente per la raccolta materiale vegetale secco. Con una capacità di taglio a secco fino a 23 KG l'ora, il modello DBT3 è ideale per i coltivatori che necessitano di una macchina in grado di lavorare grandi raccolti, che desiderano accelerare i processi produttivi e salvaguardare gli standard.
Tecnologia soft tumble, applica il taglio perfetto, indipendentemente dalle dimensioni, dalla forma o dalla densità del fiore.