The 7A Cli-mate 5 Speed ​​Controller for ventilation and co2 consists of 5-speed manual controls. This very useful device has a highly resistant housing in case of flooding. The Controller manages the operation of the fans and the supply of co2, in such a way as to create an ideal micro climate.
In the event that the knob that manages the 5 speeds should it block, there is an anti-drip button that activates the ventilation or the 100% co2 supply. Therefore the operation of the Cli-mate5 Speed ​​Controller is guaranteed at all times.

The 7A Cli-mate 5 Speed ​​Controller for ventilation and co2 consists of 5-speed manual controls. This very useful device has a highly resistant housing in case of flooding. The Controller manages the operation of the fans and the supply of co2, in such a way as to create an ideal micro climate.
In the event that the knob that manages the 5 speeds should it block, there is an anti-drip button that activates the ventilation or the 100% co2 supply. Therefore the operation of the Cli-mate5 Speed ​​Controller is guaranteed at all times.

Data logger, which records CO2 levels, temperature, humidity and relative light from connected sensors. The measurement interval can be set from 5 seconds to 5 minutes. T
Insert an 8 Gb SD card, where all values ​​are saved automatically. You can save around 45 million measurements!
The data is displayed in graphs on your PC. The software is very easy to use, compatible with all Windows processes and can be downloaded via the website.

Small basic CO2 meter for measuring carbon dioxide concentration indoors or in a greenhouse. The basic CO2 meter is small, compact and very reliable. Recharges via USB.
The CO2 meter measures the amount of CO2 in PPM (parts per million) from 0 to 3000 with a resolution of 10 ppm. It is very reliable and the measurements are very fast.
ElCo2 is essential for the development of plants, which use it to form their structure and create new branches and shoots. Normally the concentration of CO2 in the air is around 400 ppm.

The CO2 meter is used to measure the concentration of carbon dioxide in the air around grow boxes and cultivation greenhouses. The Co2 meter is ideal for knowing the conditions indoors or in greenhouses.
It has a multi-parameter monitor as it informs about the results of the measurement of temperature, humidity and CO2.

This  Co2 kit contains 1 disposable 0.5 kg cylinder, 1 pressure reducer, 1 solenoid valve.
This system can work for a period of 4-8 weeks, depending on the quantity of Co2 emitted. The emission of Co2 is controlled by a highly sensitive pressure reducer and a pressure indicator.
Ideal kit for grow rooms  or 2 m2 rooms

Spare solenoid valve compatible with the Co2 kit with disposable cylinder that allows you to start or stop the emission of Co2, but does not control the quantity.

This regulator from Ecotechnics is perfect for use with Co2 cylinders, and it can also be combined with the Evolution Co2 Controller. It is produced with high quality components, suitable for an output flow rate of 17 liters per minute.

The Ecotechnics Co2 Control Unit has been specifically designed to allow easy Co2 enrichment for your greenhouse. The use of this controller is very simple and will save you problems in the free use of Co2. The first thing to do is to calculate the internal volume of the growing area in cubic meters. This can easily be calculated by multiplying length X depth X height. For example, a room 3m wide, 5m long and 2.5m high has an internal volume of 37.5m3. It is necessary to connect the regulator to the Co2 cylinder and the Co2 control unit connected through the appropriate cable, do not forget the rubber gasket. NOTE: pressure reducer not suitable for disposable cylinders.

The Ecotechnics Evolution Co2 Regulator uses the latest microprocessor and infrared technology to monitor and control carbon dioxide ( Co2) levels in your grow room. The controller can be used with both Co2 cylinders and Co2 generators and can work with or without the Ecotechnics Co2 sensor, in addition to this it can be interfaced with most thermostats and hydrostats on the market. It can also be connected with Ecotechnics Evolution Digital Fan Speed ​​Controller which constantly monitors the temperature and humidity inside your grow room by constantly controlling the revolutions of your extractors to maintain the ideal climatic conditions for optimal growth.

The Evolution Fan Speed ​​Controller digital control unit constantly monitors the temperature and humidity inside your Grow-Room and constantly controls the revolutions of your extractors to maintain the ideal climatic conditions for plant growth. The control unit also controls a warmer (we recommend a ceramic thermo fan, it does not emit light and is safer) and is compatible with the Ecotechincs Evolution CO2 control unit. The control unit is able to control multiple extractors on each channel (output/input) up to a maximum combined power of 6 Ampere per channel. The fan heater output is capable of carrying loads of up to 3 kW making it compatible with most fan heaters and gas heaters.

The Ecotechnics Evolution CO2 Regulator uses the latest microprocessor and infrared technology to monitor and control the carbon dioxide (CO2) levels in your grow room. The controller can be used with both CO2 cylinders and CO2 generators and can work with or without the Ecotechnics CO2 sensor, in addition to this it can be interfaced with most thermostats and hydrostats on the market. It can also be connected with Ecotechnics Evolution Digital Fan Speed ​​Controller which constantly monitors the temperature and humidity inside your grow room by constantly controlling the rpm of your extractors to maintain ideal climatic conditions.

The latest generation Evolution CO2 probe, from the Ecotechnics brand is the latest and most innovative in sensor technology using advanced solid state indium emitting diode (LED) LEDs and gold optic detectors designed with precision. offers fast real-time response and high accuracy CO2 detection from 0 to 10000 PPM, when connected to the Evolution digital CO2 regulator, with infrared technology and microprocessor you will be able to make the most of the technology for level control and regulation of CO2 in your grow space.

Spare probe for the Evolution Fan Controller. The probe should be suspended in a suitable place. The probe is a sensitive piece of equipment and must therefore be handled with care, and under no circumstances should the probe be immersed in water.
Probe length: 5 m
Warranty: 1 year.

This Co2 Generator allows you to increase and correctly manage the levels of carbon dioxide within your indoor cultivation and is particularly suitable for greenhouses and large professional crops spread over large spaces.
Co2 Generator LP uses liquid propane gas cylinders, has 4 burners and is the most efficient and economical method of increasing carbon dioxide (CO2) levels indoors of the grow room or your greenhouse. This generator for the production and correct management of Co2 levels is equipped with an automatic ignition system that operates through a 12 VDC network card with discharge and safety solenoid valve: the valve sensor triggers immediately in case of ignition failure an alarm.

This Co2 Generator allows you to increase and correctly manage the levels of carbon dioxide within your indoor cultivation and is particularly suitable for greenhouses and large professional crops spread over large spaces.
Co2 Generator LP uses liquid propane gas cylinders, has 8 burners, and is the most efficient and economical method of increasing carbon dioxide (CO2) levels indoors of the grow room or your greenhouse. This generator for the production and correct management of Co2 levels is equipped with an automatic ignition system that operates through a 12 VDC network card with discharge and safety solenoid valve: the valve sensor triggers immediately in case of ignition failure an alarm.

Co2 Boost is a natural Co2 production system that is simple to assemble and use. With this automatic and natural CO2 production system, optimal results can be achieved in terms of time and production of indoor cultivation.
The system consists of the bucket, pump, rigid tube and silicone tube.
Ecological and natural system the compound contained in the Co2 Boost bucket is 100% organic, does not release unpleasant odors and does not contain dangerous gases.

Spare bucket for Co2 

Slow release Co2 tablets for plants are simple to use and cheap; they serve to supplement the irrigation solution with carbon dioxide. They guarantee accelerated growth thanks to the benefit brought directly to the root system. They are effervescent tablets with extra slow release of carbon dioxide.
Ideal for administering Co2 via the root system, then added directly to the hydroponic nutrient tank, or added to the irrigation solution.
The Co2 tablets are also suitable for atmospheric administration inside the grow room.
Just dissolve the tablet in water and place it inside the cultivation air with the light on and the extractor off.

CONTAINS 60 TABS

Exhale  by HomeGrown CO2 is a revolutionary solution to implant Co2 in your Grow Box in a 100% organic way. This bag contains a mass of mycelium which, at rest in the Grow Room, and without any maintenance, integrates the necessary and fundamental Co2 for luxuriant growth.
It is the cheapest solution to obtain excellent results, as sometimes the use of CO2 cylinders is very expensive. No maintenance, just take the bag and place it over the plants to allow the CO2 to descend directly on them. The use of Exhale is recommended for small and medium Grow Boxes, and one bag is sufficient for 5 plants, suitable for all types of plants and regardless of their phase.
Its duration is approximately 6 months

The Carbon B-1 control unit was created to measure the level of carbon dioxide in the grow room. An extremely accurate probe combined with a microprocessor create a simple and accurate method for measuring carbon dioxide within your grow room. Carbon B1 can measure carbon dioxide in the air up to 2500ppm. You can set the level of co2 required, using the knobs, which will be kept inside the grow. A photocell automatically activates operation only during the day.
Two LEDs positioned on the front face of the control unit help to quickly read the level of carbon dioxide contained.
The probe can be placed 5 meters above the control unit.

The Carbon D-1 unit was created to measure the level of carbon dioxide in the grow room. An extremely accurate probe combined with a microprocessor create a simple and accurate method for measuring carbon dioxide within your grow room. Carbon D1 can measure carbon dioxide contained in the air up to 2500ppm.
The digital screen will show the convenient configuration to select the desired Co2 level by a simple button placed on the front.
A built-in photocell ensures that the unit operates only during the day or night, depending on the pre-settings.
The Co2 sensor can be placed up to 5 meters away from the regulator.

The Deluxe Superpro Digital Climate Controller features a precision NDIR Carbon Dioxide (Co2) sensor that measures Co2 levels up to 2500 PPM. The Deluxe Superpro Digital Climate Controller also contains a set of precision sensors that maintain the atmosphere in the grow area by measuring humidity levels, air temperature and lighting. The Deluxe Superpro Digital Climate Controller receives information from sensors and activates extractors, air conditioners, dehumidifiers, heaters and Co2 equipment as needed to maintain optimal levels for indoor growing. The DDAC-1 comes pre-programmed with ideal values, but the user can change the parameters when needed.

Digital CO2 Controller is an easy to use controller for measuring and maintaining CO2 levels in your greenhouse or grow room: it has a large digital LCD screen equipped with a probe with a 4.5 meter cable, where you can read in real-time ppm levels, day, hour, minute, alarms, etc. This screen is divided into zones which makes it much easier and faster to locate the reading of the parameters.
Inside the digital LCD screen has a fuse that protects the controller. You have the possibility to change the probes, so you will always have the sensor as accurate as the first day.