The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high-quality cable gland protects the connection cable

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high quality cable gland protects the connection cable

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high-quality cable gland protects the connection cable

The air-cooled SPUDNIK reflector must be connected to an air extractor to directly extract the heat produced by the lamp.
Its use is excellent in very hot growing places.
Suitable to operate with 600 and 1000W lamps.
Possibility of connecting several reflectors together thanks to the side access for extraction. Equipped with tempered glass.
150mm diameter air-cooled reflector.

GAVITA HORTISTAR 600SE replacement reflector for GAVITA lighting fixtures up to 600W with E40 socket lamp
Not suitable for reflectors with Dualend bulb

High quality reflectors in galvanized steel with high brightness aluminum reflector. Great uniformity of light provided by the German aluminum used in its manufacture which reflects up to 95% of the light emitted. Its glass plate is treated to withstand high temperatures, but it is not recommended to use it without an extractor. This plate is attached to a frame that opens to screw in the bulb or change it. The frame has a neoprene sponge that gives the whole a great hermetic seal, which forces the air to enter and exit through the reflector sleeves.

High quality reflectors in galvanized steel with high brightness aluminum reflector. Great uniformity of light provided by the German aluminum used in its manufacture which reflects up to 95% of the light emitted. Its glass plate is treated to withstand high temperatures, but it is not recommended to use it without an extractor. This plate is attached to a frame that opens to screw in the bulb or change it. The frame has a neoprene sponge that gives the whole a great hermetic seal, which forces the air to enter and exit through the reflector sleeves.

Genuine AC/DE reflector construction, especially for double-ended lamps, provides maximum efficiency and optical uniformity.
Patented sealing technology eliminates the heat generated by the lamp without cooling the lamp below its optimum operating temperature.
It is specially made for double shell horticultural lamps (not included). Improves lamp PAR values ​​up to 90% PAR in 10,000 hours of use. Its interior is lined with 95% reflective textured German aluminum with angular inserts that provide excellent uniformity and diffusion. Manufactured to the highest standards for professional growers.

It is the latest and most revolutionary deflector on the market. It is made of galvanized aluminum, in Germany, with a reflection of 98% in 1.40m of width, so the lumens emitted by the bulbs will fall directly on your plants. Thanks to its four-sided pyramid shape, it distributes the light intensity evenly, leaving no corners or sides. It is a reflector that does not overheat, reducing the temperature on the surface by up to 14°C. The rhombus-shaped apex of the structure hides a spherical opening in the central part, above the bulb, which allows the hot air generated to be evacuated. It has a clamp that fits into the opening with the ability to fit an air extraction hose.

Patented reflector, with a unique design, with a low profile that allows maximum vertical growth space, particularly suitable for applications where the ceiling is very low. Even if its connections are for 8 ", the reflector is only 5.6" tall. It runs on conventional 8" flexible conduit. This reflector is a piece of engineering with a 95% reflective Hortibright aluminum interior, made in Germany, that delivers performance, unmatched reflectivity and light diffusion.Includes a double bubble level to properly level the reflector.Fully sealed, has double gasketed tempered glass and a hinged frame to hold it securely in place.Easy access for lamp changes or cleaning internal.  

Reflector with Hortibright aluminum interior with 95% reflection. Excellent diffusion and reflectivity. Tempered glass with double gasket and hinged frame. Maximum air cooling thanks to the EZ Breeze system. Swing Stop system to prevent the glass from opening abruptly. Galvanized steel body with powder coating.
It has a double bubble level for easy leveling.

Special reflector with patented optical technology that allows the heat generated by the lamp to be extracted without cooling the lamp below the correct operating temperature. The cooling sleeves feature a ring to hold the ducts securely in place. German aluminum interior with 95% reflection and 98% reflective corner inserts for excellent uniformity, performance and diffusion. Powder coated galvanized steel housing. Manufactured to the highest standards with double neoprene gaskets for a watertight seal. The tempered glass has a hinged frame for easy lamp replacement or cleaning. Supplied with a double level to level the reflector in order to hang it correctly.

The ideal solution to refrigerate the growing area without losing even a small part of the reflection capacity of a conventional reflector.
The product consists of a 150 x 400 mm cooltube and a stucco reflector, in the shape of bat wings, to be placed on the upper part, obtaining both the benefit of being able to extract the air through a cooltube and of reflecting the light in a normal 8-sided reflector.

GAVITA HORTISTAR 600SE replacement reflector for GAVITA lighting fixtures up to 600W with E40 socket lamp
Not suitable for reflectors with Dualend bulb

The Lumi Aereo Tube colltube reflector  is the most advanced model  of reflector on the market, it allows the air flow to flow inside the reflector and control the temperature of the cultivation environment.
Tempered glass detachable lamp holder for easy lamp access and cleaning of the 2-part outer reflector for superior light output and serial multicolor diffusion (recommended maximum 2 per fan)

The Lumi Aereo Tube colltube reflector  is the most advanced model  of reflector on the market, it allows the air flow to flow inside the reflector and control the temperature of the cultivation environment.
Tempered glass detachable lamp holder for easy lamp access and cleaning of the 2-part outer reflector for superior light output and serial multicolor diffusion (recommended maximum 2 per fan)

The Lumi Aereo Tube colltube reflector  is the most advanced model  of reflector on the market, it allows the air flow to flow inside the reflector and control the temperature of the cultivation environment.
Tempered glass detachable lamp holder for easy lamp access and cleaning of the 2-part outer reflector for superior light output and serial multicolor diffusion (recommended maximum 2 per fan)

The ideal solution to refrigerate the growing area without losing even a small part of the reflection capacity of a conventional reflector.
The product consists of a 125 x 400 mm cooltube and a stucco reflector, in the shape of bat wings, to be placed on the upper part, obtaining both the benefit of being able to extract the air through a cooltube and of reflecting the light in a normal 8-sided reflector.

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high-quality cable gland protects the connection cable

This Cooltube can be used with HPS-MH lamps and is easily connected to the extractor to be cooled. The hot air produced by the bulb is directly expelled from the extractor, considerably reducing the temperature of the cultivation area.
It is easily connected to the extractor with the aid of 12.5cm aluminum pipes.

This Cooltube can be used with HPS-MH lamps and is easily connected to the extractor to be cooled. The hot air produced by the bulb is directly expelled from the extractor, considerably reducing the temperature of the cultivation area.
It is easily connected to the extractor with the aid of 15cm aluminum pipes.

This Cooltube can be used with HPS-MH lamps and is easily connected to the extractor to be cooled. The hot air produced by the bulb is directly expelled from the extractor, considerably reducing the temperature of the cultivation area.
It is easily connected to the extractor with the aid of 12.5cm aluminum pipes.

The Cooltube reflector can be used with HPS-MH lamps and is easily connected to the extractor to be cooled. The hot air produced by the bulb is directly expelled by the extractor, considerably reducing the temperature of the cultivation area, thanks to its direct cooling system, it allows the lamp to be brought closer to the plants without the risk of burning them but favoring their development.
It is easily connected to the extractor with the aid of 15 cm aluminum pipes.

The Cooltube reflector can be used with HPS-MH lamps and is easily connected to the extractor to be cooled. The hot air produced by the bulb is directly expelled by the extractor, considerably reducing the temperature of the cultivation area, thanks to its direct cooling system, it allows the lamp to be brought closer to the plants without the risk of burning them but favoring their development.
It is easily connected to the extractor with the aid of 15 cm aluminum pipes.