Generic Accessories and Spare Parts
Generic Accessories and Spare Parts
Showing 1-24 of 111 item(s)
1 inch rubber gasket to introduce the tee into General Hydroponics cultivation systems, such as waterfarm and aquafarm.
€2.50
Root control discs are designed to fit the AutoPot 1Pot system, Easy2Grow kit and extension kits. These discs are black and gold in color and are placed in the tray below the vase, gold should be facing up. The purpose of the disc is to control the roots and to prevent them from leaving the pot and heading towards the Aquavalve. They are very effective thanks to the special golden metallic coating.
Although the discs last several cycles, it is advisable to replace the discs at the beginning of each cycle.
€1.20
The 6 mm Top Hat Grommet provides a direct connection to an airtight cable using the 6 mm tubing with the 30 L and 47 L tanks. A 10 mm hole must be drilled in the tank, insert the 6 mm joint plug, then pass the 6 mm tube through the eyelet. Push the tube through the eyelet until you see the tube popping inside the tank.
€0.90
Spare silicone caps for Aquavalve valve, these must be inserted in the holes of the upper and lower floats of the Aquavalve.
Pack of 10 Units.
€5.50
The 9mm Top Hat Grommet provides a direct connection to a hermetic cable using the 9mm tubing with the 30L and 47L reservoirs. You must drill a 10mm hole in the reservoir, insert the 9 mm, then pass the 6 mm tube through the eyelet. Push the tube through the grommet until you see the tube popping inside the tank.
€0.90
Filter compatible with the Easy2Grow kit, to be used with 30 L and 47 L tanks. It simply has to be inserted inside the tank once the 6 mm tube has been passed through the upper panel up to the bottom of the tank. If it detaches from the tube it will float on top, which can be prevented by forcibly squeezing the wire into its installation.
This product must be used with a sponge filter for Autopot systems.
€4.90
Marix discs are designed to fit the 1Pot system, easy2grow kit and 2Pot extension trays to extend the easy2grow kit. The discs are black in color and are placed inside the vase. The purpose of the Marix disc is to prevent compost or soil from flowing out of the pot, keeping the system clean and the AQUAvalve free of debris. They will also provide minimal protection from escaping roots. Although the Marix discs will last several seasons, it is advisable to replace the discs at the start of each season, this will prevent any disease from being transferred if any.
€1.50
Autopot root control discs are designed for 1Pot systems, easy2grow kit and Easy2Grow extension kits. These discs are black and gold and should be placed on the tray under the vase with the gold side up. The function of the root control disc is to prevent them from growing out of the pot and reaching the aquavalve. They are very effective due to the gold coating with a special metallic coating. It is important to bear in mind that the roots, despite the sensitivity to this coating, sometimes manage to cross it, therefore it is advisable to lift the pot every now and then to check if they have escaped from the barrier.
Even if the discs have a duration of several seasons, it is advisable to replace them at the beginning of each cycle.
€1.80
The Airdome has been designed to increase oxygen in the root area. Experiments conducted with the Airdome on plants of the Luffa genus have shown an increase in production of 130%! If we consider more common fruit species, we can expect an increase of up to 30% in yield.
Very easy to use, it can be whipped in less than 30 seconds.
The Airdome ventilation dome is very easy to use and can be assembled in less than 30 seconds; it is placed on the bottom of the pot, covered with the chosen substrate and connected to an air pump.
€5.90
Plastic dome for the Airdome system.
€3.90
Easy2Grow module for 2 pots that can be used to replace a broken module, or to add another to an existing kit.
< br />
€34.50
Semi-rigid plastic sheet for NFT systems, useful for keeping rockwool cubes still and stable.
€13.50
Kit to transform the Ecogrower system into a Rainforest 2 system.
€179.90
Kit to convert the Rainforest 2 system into the Ecogrower system.
€49.90
Replacement motor for the 12 V Rainforest system.
€179.90
Additional plastic plates for GHE Rainforest 2 system. Each plate has 3 holes to accommodate 3 hydro 8 cm baskets.
€42.90
Replacement tank for the Aeroflo 60 aeroponic system.
Ideal for Aereoflo 60
200 L
€229.90
Additional plastic plates for GHE Rainforest 2 system. Each plate has 6 holes to accommodate 6 hydro 8 cm baskets.
€37.90
7 mm-26 cm support tube with 180º sprayer for aeroflo and aerofarm systems.
€3.90
7 mm-26 cm support tube without sprayer 180º for aeroflo and aerofarm systems.
€3.50
Connection hose 7 mm-48 cm without sprayer 180º for dutch pot hidro and aeroflo systems.
€3.60
7 mm-48 cm connection hose with 180º sprayer for dutch pot hidro and aeroflo systems.
€3.90
Hose required to connect the Dutch Pot Aereo 1m2 submersible pump and the irrigation "Tee" line.
€5.50
Hose required to connect the Dutch Pot Aereo 2m2 submersible pump and the irrigation "Tee" line.
€5.50