Replacement lens for Naked COB Phytolite XTE 60W and 120w.
The standard lens already mounted has an angle of 60 degrees. By mounting it at 90 or 120 degrees, you will have a wider and less concentrated emission beam.

Replacement lens for Naked COB Phytolite XTE 60W and 120 W.
The standard lens already mounted has an angle of 60 degrees.
Mounting it at 90 or 120 degrees you will have a wider and less concentrated emission beam.

By replacing the module on your GX with this CREE COB XTE you will have an increase of about 50% in PAR emissions compared to those emitted by the traditional module.
The spectrum of this COB is "White" or "full Spectrum" and is suitable for the complete cycle of the plant.
You can change all or even just a part of the modules.
Replacement is immediate and occurs by unscrewing the 4 screws that secure the module and disconnecting a connector. The guarantee does not expire.
FULL CYCLE The GX Profssional line is marketed exclusively with the standard 16x3W modules.

All the power of the CREE CXB 3590 COB in a complete "Do It Yourself" KIT, with passive cooling and powered by an efficient and robust Meanwell professional power supply. The kit is assembled and tested by Phytolite technical support and guaranteed against manufacturing defects.
The high power CREE CXB 3590 COB LED is mounted on an anodized aluminum heat sink.

Product with LED made in the US. It can be used both as a primary source and as a lateral/supplementary source.
To be used both in small grow boxes, and to illuminate the less exposed areas of the grow rooms or in clusters to make crops of small and medium size.
Complete set including all components for plug & grow.
Components, connection cables, power supplies, heat sink and suspension cables.

Iron chains  for hanging filters, fans, reflectors, etc.
2 1.5 m chains

"S" hooks ideal for hanging objects and power cables in the grow room.
2 Units.

Remote control for the control and programming of the GIB Lighting LXG TIMER 2.0 600 W electronic transformer

The Cosmorrow® includes everything needed to assemble one or more Cosmorrow® LEDs. Thanks to the 2.1×5.5 mm DC plug. With  this new clip system  it is now easier to set up, much stiffer and holds the LED securely in place.
Cosmorrow power supplies are produced in 40 and 80 watts and can therefore support one or two LED bars.
Designed with the plug and play system, it will be very easy to connect the transformer to your LED bar to turn it on.

The Cosmorrow® includes everything needed to assemble one or more Cosmorrow® LEDs. Thanks to the 2.1×5.5 mm DC plug. With  this new clip system  it is now easier to set up, much stiffer and holds the LED securely in place.
Cosmorrow power supplies are produced in 40 and 80 watts and can therefore support one or two LED bars.
Designed with the plug and play system, it will be very easy to connect the transformer to your LED bar to turn it on.

The Cosmorrow® includes everything needed to assemble one or more Cosmorrow® LEDs. Thanks to the 2.1×5.5 mm DC plug. With  this new clip system  it is now easier to set up, much stiffer and holds the LED securely in place.
Cosmorrow power supplies are produced in 40 and 80 watts and can therefore support one or two LED bars.
Designed with the plug and play system, it will be very easy to connect the transformer to your LED bar to turn it on.

The Cosmorrow® includes everything needed to assemble one or more Cosmorrow® LEDs. Thanks to the 2.1×5.5 mm DC plug. With  this new clip system  it is now easier to set up, much stiffer and holds the LED securely in place.
Cosmorrow power supplies are produced in 40 and 80 watts and can therefore support one or two LED bars.
Designed with the plug and play system, it will be very easy to connect the transformer to your LED bar to turn it on.

SANLUGHT locking bracket for aluminum rail.

The SANlight GST25 is a socket designed to be integrated into the SANlight module - Flex10 and Flex20

The SANlight GST25 is a socket designed to be integrated into the SANlight module - Flex10 and Flex20. With the SGA60 you can use 1-6 SANlight Flex10 modules or 1-3 SANlight Flex20 modules

Product with LED made in the US. It can be used both as a primary source and as a lateral/supplementary source.
To be used both in small grow boxes, and to illuminate the less exposed areas of the grow rooms or in clusters to make crops of small and medium size.
Complete set including all components for plug & grow.
Components, connection cables, power supplies, heat sink and suspension cables.

T AC connector for Sanlight 4qw and 6qw fixtures.

2.1m AC spare plug for Sanlight 4qw and 6qw fixtures.

2 meter interconnection cable with 3-pin pins at both ends that can be used with systems such as Solux Vega Led 360W, Solux Vega Led 480W, Vega Solux Controller

The Lumatek VF650W LED driver allows simultaneous control and connection of several VF series LED fixtures.
The VF650W LED controller can be remotely positioned for added flexibility and can power one to seven VF90W LED fixtures or one to five VF120 LED fixtures simultaneously.
The VF LED range emits a High performance cultivation with spectral output and PPF ideal for propagation of seedlings, cuttings, clones and all low PPFD target crops.

Tappo terminale con protezione IP68 per mantenere i cavi al sicuro da liquidi o umidità compatibili con i modelli Solux Pro 200 cm 20W , 120 cm 20W , 60 cm 10W

Cavo di alimentazione compatibile con i tubi a spettro completo 60 cm 10W , 120 cm, 20W , 200 cm, 20W con un'estremità con spina femmina a 2 pin e spina Schuko europea sull'altra.

Cavo di inter connessione con protezione IP68 per unire fino a 6 unità per i modelli  Solux Pro 200 cm 20W , 120 cm 20W , 60 cm 10W