E40 ceramic lampholder, resistant to very high temperatures, used as a replacement for reflectors. The ceramic E40 lamp holder is suitable for HPS and MH lamps.

Plate support support included.

The Easy Roller is a pair of up and down pulleys to adjust the height of the lamps intended for the growth of your plants, it is suitable for any type of reflector. The easy-roller pulleys are essential for raising and lowering the reflector of your lamp: with these pulleys it is possible to position the reflector at the desired distance from the plants and during the growth phase of the plant, in order to adjust it ad hoc according to needs.
The pair of easy rollers can support a weight of up to 12 kg.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficacy and can be positioned at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the covered surface and the depth of penetration, avoiding burns on the leaves and shoots. With the Super Spreader, an excellent and more homogeneous distribution of light is obtained, effectively reflecting the excess light from the central point of the bulb, reaching the farthest ends from the crop.
It also reduces excess light reflection and acts as a "refrigerator" in the s areas of the lamp where heat accumulates the most.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficacy and can be positioned at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the covered surface and the depth of penetration, avoiding burns on the leaves and shoots. With the Super Spreader, an excellent and more homogeneous distribution of light is obtained, effectively reflecting the excess light from the central point of the bulb, reaching the farthest ends from the crop.
It also reduces excess light reflection and acts as a "refrigerator" in the s areas of the lamp where heat accumulates the most.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficiency and can be placed at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the area covered and the depth of penetration, avoiding burns on leaves and shoots.
With the Super Spreader you get an unbeatable and more homogeneous distribution of light, effectively reflecting excess light from the central point of the bulb, reaching the furthest ends of the crop.
It also reduces excess light reflection and acts as a "cooler" in the areas of the lamp where heat accumulates the most.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficiency and can be placed at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the area covered and the depth of penetration, avoiding burns on leaves and shoots.
With the Super Spreader you get an unbeatable and more homogeneous distribution of light, effectively reflecting excess light from the central point of the bulb, reaching the furthest ends of the crop.
It also reduces excess light reflection and acts as a "cooler" in the areas of the lamp where heat accumulates the most.

This support can be used with any model of Adjust-A-Wings Mediumed reflector and is prepared to be able to mount and connect, on the top, the Hellion electronic ballast, thus minimizing electromagnetic interference .

ADJUST-A-WINGS MEDIUM product repair kit for consisting of: 

• 4 screws

• 2 supports for suspension

• 2 cables for adjusting the wings.

ADJUST-A-WINGS SMALL product repair kit for consisting of: 

• 4 screws

• 2 supports for suspension

• 2 cables for adjusting the wings.

ADJUST-A-WINGS LARGE product repair kit for consisting of: 

• 4 screws

• 2 supports for suspension

• 2 cables for adjusting the wings.

The Adjust A Wings lamp holder is suitable for the Enforcer, Avenger and Defender models. This lamp holder is manufactured in polycarbonate, it is therefore flame retardant and heat resistant. In addition, this material is light, resistant and provides additional insulation around the internal electrical connections for greater protection.

The Add a Lamp Light Rail mechanical arm allows you to add a spotlight back and forth with a single motor:
The arm features a threaded post that connects to the undercarriage's main motor. Basically, this product - which represents an optional - connects to the Light Rail motorized track kit (also commonly called Grow Light Rail) extending it  and allowing you to add a lamp to the entire indoor lighting system.

For those who want to continue expanding their Light Rail 4.2 world, we present the stabilizer bar. The Light Rail has only one point where to hook the lamp, with the stabilizer bar we will hook it from 2 points and the lamp will not move. Stabilizer bar, to be able to place your lamp in the Light Rail lighting trolley.

Guide trolley with wheels for LightRailAuxiliary trolley compatible with LightRail 3.0, 3.5, 4.0 and 4.20. This trolley is the same as the one found in the LightRail box but without the hardware. It allows us to add a lamp to the track without having to buy a new motor.

Extension for the expansion of the Light Trail rail. With this simple accessory you can control a second reflecting screen placed in line. The length of the extension is 2 meters in this way you can cover the total length of 4.20 linear meters with a single motor.

Allows to change the traction wheel located in the engine case of the Lightrail.

LIGHT RAIL 4.0 ADJUSTADRIVE mounts a new linear motor that allows a double speed regulation, making the following settings possible: 
travel speed on the tracks;
reversal delay (from 0 to 60sec) allowing to illuminate the area on the side of the greenhouse for a longer time.
The new LightRail 4.0 AdjustaDrive, designed and manufactured in the United States, is the innovative system for moving the reflectors and is compatible with all Lightrail rails and accessories 3.0 and 3.5.
This item is supplied as a complete and easy to assemble kit with motor, 2 meters of rails, screws, bolts and assembly instructions.

LightRail 4.0 AdjustaDrive Light Mover Kit is a motor that allows the lamp to move on a 2-meter rail, illuminating twice the space.

(compatible with all rails and accessories of LightRail 3.0 and 3.5 models).

LightRail path limiter.

The Green eye unicorn is a lighting device that creates a concentrated and direct beam to facilitate vision and work in the growing area without damaging the plants.
The green light front lamp is a light that is not visible to plants, which will allow you to continue with their care at any time without altering the night cycle.
High brightness green LED equipment with optical lens that creates a concentrated and direct beam to facilitate vision and work in the greenhouse, keeping the hands free.< br /> It is light, small and compact, with adaptable headbands to position the Green Eye Unicorn on the forehead.
It has 4 lighting options and it is an adaptive lens up to 80º.

Weight: 195 Gr

LUMii rope pulleys are super  resistant with a capacity of up to 65Kg, they are pulleys with carabiners and ropes  capable of lifting up to 65kg.
The large S-hooks allow you to hang everything easily and the carabiners tighten well and lock firmly.

Schuko plug to be wired for a maximum load of 230V/16A in white color and type DE.

Iron chains  for hanging filters, fans, reflectors, etc.
2 1.5 m chains

"S" hooks ideal for hanging objects and power cables in the grow room.
2 Units.