The original Gas Atomic, a mix composed of 35% propane and 65% N-Butane.
100% pure and clean gas 
Pack of 300 ml.

Colibrì butane gas refill bottle. Colibrì butane gas is famous for being among the best quality on the market, as it does not release residues and impurities after processing.
Content 300 ml.

DEXSO organic gas for extraction is an extremely innovative and effective product, because it manages to extract much more than traditionally used products, in less time and in a safer way!
Dexso is 99.99% pure dimethyl ether; it is a high quality solvent, which does not leave any traces or toxic impurities in the essential oils obtained.
Compared to butane, which was widely used in the past, the structure of the dimethyl ether molecule allows a broader spectrum of fat-soluble compounds to be extracted, in short: it extracts more. This means a higher yield and a higher quality of the final product obtained with the extraction, because it manages to preserve the aroma.

Heating plate, with digital thermostat and adjustable temperature in tenths of a degree.
A pyrex tray is usually used to heat the distilled water (bain-marie) onto which the contents of the Gasolinator or Roller Extractor are poured.

Oven specially designed for degassing or purification of essential oil extracts (BHO). The oven works in a delicate ambient temperature (ambient heat, in conditions of reduced pressure), to accelerate the degassing of the solvent, in this way the colour, the aroma and the total quality of the product will be perfectly preserved.< br />Mr Hide extracts engineers have applied their vast experience in the industry to produce a series of ovens designed exactly for your needs: low consumption, high production and optimal performance.

Oven specially designed for degassing or purification of essential oil extracts (BHO). The oven works in a delicate ambient temperature (ambient heat, in conditions of reduced pressure), to accelerate the degassing of the solvent, in this way the colour, the aroma and the total quality of the product will be perfectly preserved.< br />Mr Hide extracts engineers have applied their vast experience in the industry to produce a series of ovens designed exactly for your needs: low consumption, high production and performance optimal.

Equipped with analytical instrumentation, vacuum systems and jacketed reactors, this system can also be used to cool tap water in the laboratory. Recirculation cooler is based on compressors that offer exceptional performance and great reliability and quiet, easy-to-use operation.
The powerful vacuum motor pumps and delivers constant flow, while the PID controller provides the ideal solution when you need precise temperature control or cooling below ambient temperature.
The circulation system made up of stainless steel materials, with anti-corrosion and low temperature anti-pollution liquid rust remover.

Mr. Hide Extracts® water and vacuum circulation pump, is a type of water jet pump, that is, it is based on the circulating water as it flows, rotary vacuum pump. Equipped with a glass air pump to adapt Jet-flow technology to obtain greater negative pressure, it is used in evaporation, distillation, drying, filtration, sublimation, etc.
It is a necessary device in: chemical industries, food industry, scientific units, production department, etc. When the vacuum pump works together with the rotary evaporator, if the user wants to stop the evaporation, he must first open the supply valve to purge the air, then the vacuum pump stops working.

The rotary evaporator is used in extraction laboratories for an efficient and gentle distillation of sample solvents by evaporation. Rotary evaporation is most frequently and conveniently applied to separate low-boiling solvents, such as butane or ethyl alcohol, from solid compounds at room temperature and pressure.
Ideal model for users looking for a 2 liter capacity. Mr.Hide Extracts® 2L rotary evaporator (evaporating flask capacity) comes with a container for heating distilled water, vertical glassware and digital control of temperature and rotation.
The rotary system features electric flask raising and lowering, allowing for optimal and fast heating times.

The Rothenberger 6 CFM is a professional pump for creating a vacuum, which protects the internal components thanks to a light and robust structure. Solenoid valve for the protection of the refrigeration cycle against oil leaks during false starts.
Vacuum gauge with built-in pressure gauge, exhaust valve for reducing the vapor in the oil tank, gases can be eliminated easily.
Special filter to reduce oil residues in the exhaust pipe, easy reading of the oil level through the sight glass, easy and quick filling of the oils without the need for special funnels, safety switch to prevent engine overheating
Easy access to the oil drain plug.

The professional polycarbonate dryer is implosion-proof. These dryers will withstand a vacuum of -740mm Hg with a loss (absolute zero: -760mm/Hg) of no more than 20mm Hg in 24 hours. The transparent upper cap is molded in polycarbonate and is coupled to the lower section in PP, ensuring the seal by means of a neoprene rubber ring inserted in a special groove.
The lid is equipped with a steel sealing valve and pressure gauge.
A thin film of grease spread on the sealing ring helps to create the initial vacuum.
Operating temperature from -25°C to + 120°C.
The lid has an internal basket of use as a container for drying agents (calcium chloride, silicon gel, etc.)

The professional polycarbonate dryer is implosion-proof. These dryers will withstand a vacuum of -740mm Hg with a loss (absolute zero: -760mm/Hg) of no more than 20mm Hg in 24 hours. The transparent upper cap is molded in polycarbonate and is coupled to the lower section in PP, ensuring the seal by means of a neoprene rubber ring inserted in a special groove.
The lid is equipped with a steel sealing valve and pressure gauge.
A thin film of grease spread on the sealing ring helps to create the initial vacuum.
Operating temperature from -25°C to + 120°C.
The lid has an internal basket of use as a container for drying agents (calcium chloride, silicon gel, etc.)

Spare tube or to be used as an extension for Roller extractor BHO XL 300. 

Spare tube or to be used as an extension for the Roller extractor BHO L 200.
Length 20 Cm

Spare tube or to be used as an extension for the roller extractor BHO M 150.
Length 15 cm

Roller extractor BHO XL 300 is an extractor for BHO and essential oils, the complete kit for GAS extraction produced with high quality components such as steel used in oil plants and pipelines of the gas which ensures that it does not suffer impurities when the GAS circulates inside.
This model is 30 cm long and can be used to introduce up to 20 grams of plant material.
The kit has a 60 micron mesh in the shape of a diffuser so that the gas that comes out of it acts as a small sprinkler so that the extraction can be deposited on a thin sheet, the tube is equipped with a safety valve which does not allow the introduction of more gas if the tube is blocked, in order to avoid unpleasant inconveniences.

Roller extractor BHO L 200 is an extractor for BHO and essential oils, the complete kit for GAS extraction produced with high quality components such as steel used in oil plants and pipelines of the gas which ensures that it does not suffer impurities when the GAS circulates inside.
This model is 20 cm long and can be used to introduce up to 15 grams of plant material.
The kit has a 60 micron mesh in the shape of a diffuser so that the gas that comes out of it acts as a small sprinkler so that the extraction can be deposited on a thin sheet, the tube is equipped with a safety valve which does not allow the introduction of more gas if the tube is blocked, in order to avoid unpleasant inconveniences.

Roller extractor BHO M 150 is an extractor for BHO and essential oils, the complete kit for GAS extraction produced with high quality components such as steel used in oil plants and pipelines of the gas which ensures that it does not suffer impurities when the GAS circulates inside.
This model is 15 cm long and can be used to introduce up to 10 grams of plant material.
The kit has a 60 micron mesh in the shape of a diffuser so that the gas that comes out of it acts as a small sprinkler so that the extraction can be deposited on a thin sheet, the tube is equipped with a safety valve which does not allow the introduction of more gas if the tube is blocked, in order to avoid unpleasant inconveniences.

Replacement steel mesh for Dexso essential oil extractor. Packaging with a silicone case containing the retina with a diameter of 23 mm.
1 Unit

Gasolintaor is a 35 cm long tube made of super resistant plastic with a 140 micron mesh sieve

The Dexso Oil Extractor combines two materials such as anodized aluminum and glass to ensure the purity of glass tube extractions without having the same fragility. The aluminum gives strength and lightness and thanks to the very high quality of the materials used for the construction of this oil extractor you will make a purchase that will last you for life.
The extractors D -Blaster are among the best extractors on the market thanks to their value for money.
Food quality chromed steel professionally welded to ensure maximum safety, stability and durability.

The Dexso Oil Extractor combines two materials such as anodized aluminum and glass to ensure the purity of glass tube extractions without having the same fragility. The aluminum gives strength and lightness and thanks to the very high quality of the materials used for the construction of this oil extractor you will make a purchase that will last you for life.
The extractors D -Blaster are among the best extractors on the market thanks to their value for money.
Food quality chromed steel professionally welded to ensure maximum safety, stability and durability.

D-Blaster extractors are among the best extractors on the market thanks to their value for money. Professionally welded food grade chrome steel to ensure maximum safety, stability and durability. The design and use are the same as a glass extractor but unlike them, the D-Blaster is indestructible.
A 50 cm high extraction tube is suitable for holding up to 80 grams of dry matter.
Suitable for the 'use with Dexso D.M.E. and other butane solvents. perfect for extractions; the D-Blaster is a product with an affordable price and high quality.
With D-BLASTER PROFESSIONAL offers the economic version of their extractor.

D-Blaster extractors are among the best extractors on the market thanks to their value for money. Professionally welded food grade chrome steel to ensure maximum safety, stability and durability.
The design and use are the same as a glass extractor but unlike them, the D-Blaster is indestructible, the its extraction tube has a height of 25 cm and is able to accommodate up to 40 gr of dry matter.
Indicated for use with Dexso D.M.E. and other butane solvents. perfect for extractions; the D-Blaster is an affordable, high quality product.