E40 ceramic lampholder, resistant to very high temperatures, used as a replacement for reflectors. The ceramic E40 lamp holder is suitable for HPS and MH lamps.

Plate support support included.

Adjust-A-Wings® Defender is the 'industrial range' of Adjust-A-Wings.
The reflection is similar to that of the Enforces (approximately 86%), the reflection surface is a 'titanium white' layer.
This heat-resistant cover produces a very diffused and uniformly extended beam of light.
The base metal is in H18 aluminum alloy (3% magnesium), an extra strong and elastic metal that will keep the parabolic curves perfect even under the toughest conditions during the assembly, disassembly or repositioning.

Mirror anodized aluminum reflector with ceramic E40 lamp holder. Increases light efficiency and optimizes light distribution across the entire growing area. They can be placed very close to plants, increasing efficiency without limiting the area of ​​action. The basic principle of lamp reflectors is logical and simple, the secret lies in a V in the center of the reflector which changes the direction of the light rays. This technique allows a greater opening and diffusion of the reflected rays, avoids the concentration of heat around the lamp and does not create a (hot) area of ​​burns concentrated on the central plants.

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high-quality cable gland protects the connection cable

Adjust-A-Wings® Defender is the 'industrial range' of Adjust-A-Wings. The reflection is similar to that of the Enforces (approximately 86%), the reflection surface is a 'titanium white' layer. This heat resistant cover produces a very diffused and uniformly extended beam of light. The base metal is H18 aluminum alloy (3% magnesium), an extra strong and elastic metal that will maintain perfect parabolic curves even under the harshest conditions during assembly, disassembly or repositioning.

The Easy Roller is a pair of up and down pulleys to adjust the height of the lamps intended for the growth of your plants, it is suitable for any type of reflector. The easy-roller pulleys are essential for raising and lowering the reflector of your lamp: with these pulleys it is possible to position the reflector at the desired distance from the plants and during the growth phase of the plant, in order to adjust it ad hoc according to needs.
The pair of easy rollers can support a weight of up to 12 kg.

The Hammered Reflector in anodized aluminum with ceramic E40 lamp holder. Increases light efficiency and optimizes light distribution across the entire growing area. They can be placed very close to plants, increasing efficiency without limiting the area of ​​action. The basic principle is logical and simple, the secret consists in a V in the center of the reflector which changes the direction of the light rays. This technique allows a greater opening and diffusion of the reflected rays, avoids the concentration of heat around the lamp and does not create a (hot) area of ​​burns concentrated on the central plants.

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high quality cable gland protects the connection cable

Adjust-A-Wings® Defender is the 'industrial range' of Adjust-A-Wings.
The reflection is similar to that of the Enforces (approximately 86%), the reflection surface is a 'titanium white' layer.
This heat-resistant cover produces a very diffused and uniformly extended beam of light.
The base metal is in H18 aluminum alloy (3% magnesium), an extra strong and elastic metal that will keep the parabolic curves perfect even under the toughest conditions during the assembly, disassembly or repositioning.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficacy and can be positioned at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the covered surface and the depth of penetration, avoiding burns on the leaves and shoots. With the Super Spreader, an excellent and more homogeneous distribution of light is obtained, effectively reflecting the excess light from the central point of the bulb, reaching the farthest ends from the crop.
It also reduces excess light reflection and acts as a "refrigerator" in the s areas of the lamp where heat accumulates the most.

The Adjust a wings reflector with gullwing opening is the most innovative among the reflectors for indoor cultivation. Its performance is unmatched by any other reflector on the market, when used with 400 or 600W lamps it increases your growing area by up to 88%! At the same time reducing electricity consumption costs and the amount of heat distributed in the environment. The opening of the wings is adjustable to adapt the light beam perfectly to the size of your environment. In combination with Super Spreader (included) you get an ideal distribution of light resulting in homogeneous fruiting.

The Prima Klima reflector essentially consists of a BSG glass tube with high light transmission. The heat and impact resistant nylon flanges insulate the air from the heat of the lamp and also act as a support for the reflector panels made of painted aluminum (PVD). The external reflector can be easily adjusted to adapt the lighting to the space requirements.
The reflector can also be used in 360° mode. The cooling effect of the tunnel allows you to bring the COOL TUBE closer to the plants. The high quality E40 ceramic lamp holder is suitable for HPS and MH lamps. A high-quality cable gland protects the connection cable

Lumatek's Tekken Pro DE Reflector is a professional reflector specifically designed for grow box cultivation. The design has closed ends, and is vented to allow for heat dissipation. Focuses light downwards into a 1.2m x 1.2m footprint. It is a high performance double ended reflector with innovative SPPDS-A grow lamps: 630W CMH and 1000W 400v DE. Tekken Pro DE is manufactured with MIRO® reflective material made from 99.99% pure aluminum and has a super reflective oxide layer that provides 95% reflectivity making it one of the most reflective materials on the market.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficacy and can be positioned at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the covered surface and the depth of penetration, avoiding burns on the leaves and shoots. With the Super Spreader, an excellent and more homogeneous distribution of light is obtained, effectively reflecting the excess light from the central point of the bulb, reaching the farthest ends from the crop.
It also reduces excess light reflection and acts as a "refrigerator" in the s areas of the lamp where heat accumulates the most.

Adjust-A-Wings® Defender is the 'industrial range' of Adjust-A-Wings.
The reflection is similar to that of the Enforces (approximately the 86%)  however the reflection surface is a 'titanium white' layer.
This heat-resistant cover produces a very diffused and uniformly extended beam of light.
The base metal is H18 aluminum alloy (3% magnesium), an extra strong and elastic metal that will maintain perfect parabolic curves even under the harshest conditions during assembly, disassembly or repositioning.

The air-cooled SPUDNIK reflector must be connected to an air extractor to directly extract the heat produced by the lamp.
Its use is excellent in very hot growing places.
Suitable to operate with 600 and 1000W lamps.
Possibility of connecting several reflectors together thanks to the side access for extraction. Equipped with tempered glass.
150mm diameter air-cooled reflector.

The Lumatek Shinobi Parabolic Ultra Reflector is a parabolic reflector manufactured to the highest standards. It was designed to cast light downwards in Spot mode. It measures 80cm wide and casts light uniformly about 1m squared. Normal reflectors allow a lot of light to travel to the side. The SHINOBI radiates light downward without relying on the sides to reflect light. The SHINOBI is entirely made of aluminum: the lamp holder, the hook, and both top plates, this to keep the weight to an absolute minimum.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficiency and can be placed at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the area covered and the depth of penetration, avoiding burns on leaves and shoots.
With the Super Spreader you get an unbeatable and more homogeneous distribution of light, effectively reflecting excess light from the central point of the bulb, reaching the furthest ends of the crop.
It also reduces excess light reflection and acts as a "cooler" in the areas of the lamp where heat accumulates the most.

Adjust-A-Wings® Defender is the 'industrial range' of Adjust-A-Wings.
The reflection is similar to that of the Enforces (approximately 86%), the reflection surface is a 'titanium white' layer.
This heat-resistant cover produces a very diffused and uniformly extended beam of light.
The base metal is in H18 aluminum alloy (3% magnesium), an extra strong and elastic metal that will keep the parabolic curves perfect even under the toughest conditions during the assembly, disassembly or repositioning.

By adding the Super Spreader accessory, the Adjust-a-Wings reflector achieves great efficiency and can be placed at an unprecedented distance of 20-30cm to grow plants and produce incredible levels of light, increasing the area covered and the depth of penetration, avoiding burns on leaves and shoots.
With the Super Spreader you get an unbeatable and more homogeneous distribution of light, effectively reflecting excess light from the central point of the bulb, reaching the furthest ends of the crop.
It also reduces excess light reflection and acts as a "cooler" in the areas of the lamp where heat accumulates the most.

Genuine AC/DE reflector construction, especially for double-ended lamps, provides maximum efficiency and optical uniformity.
Patented sealing technology eliminates the heat generated by the lamp without cooling the lamp below its optimum operating temperature.
It is specially made for double shell horticultural lamps (not included). Improves lamp PAR values ​​up to 90% PAR in 10,000 hours of use. Its interior is lined with 95% reflective textured German aluminum with angular inserts that provide excellent uniformity and diffusion. Manufactured to the highest standards for professional growers.

High quality reflectors in galvanized steel with high brightness aluminum reflector. Great uniformity of light provided by the German aluminum used in its manufacture which reflects up to 95% of the light emitted. Its glass plate is treated to withstand high temperatures, but it is not recommended to use it without an extractor. This plate is attached to a frame that opens to screw in the bulb or change it. The frame has a neoprene sponge that gives the whole a great hermetic seal, which forces the air to enter and exit through the reflector sleeves.

The ideal solution to refrigerate the growing area without losing even a small part of the reflection capacity of a conventional reflector.
The product consists of a 125 x 400 mm cooltube and a stucco reflector, in the shape of bat wings, to be placed on the upper part, obtaining both the benefit of being able to extract the air through a cooltube and of reflecting the light in a normal 8-sided reflector.

This support can be used with any model of Adjust-A-Wings Mediumed reflector and is prepared to be able to mount and connect, on the top, the Hellion electronic ballast, thus minimizing electromagnetic interference .