The TRIMPRO BUCKER is designed to make the process of separating flowers from branches easier.
Easy, fun and safe to use, the TRIMPRO separator allows you to reduce the separation time by at least 50% and treat the flowers with greater care, since it allows you to avoid the use of scissors and the handling associated with this technique.
It will be sufficient to introduce the stem into one of the holes and the rubber rollers of the separator will pull it leaving the branch completely clean.
The flowers will remain accumulated and ready to be inserted in the selected TRIMPRO trimmer.

User instructions CLICK HERE

Built on the same principles as the original Trimpro, the TRIMBOX is designed for smaller producers.
It can be mounted on any work table with clamps and brackets (supplied).
The lightweight Trimbox is very efficient and offers excellent results.
To cut, take a freshly cut plant branch in your hand collected and move it on the grid with a movement that goes and is combined with a rotation of the plant.

User instructions CLICK HERE

The Top Spinner trimmer cleans up the crop in minimal time.
The bottom container made of scratch-resistant metal can be cleaned in the dishwasher.

The Top Spinner ROTOR pruner is equipped with a strong and multi-speed adjustable motor. Process all types of crops in a short time and with minimal effort.

Master Bucker offers you a production of 65 kg/h, equivalent to the work of 15 people. Fresh or dry, thanks to its speed control you will be able to preserve the shape and size of the plant material. Designed for large productions, it features a powerful motor and rollers that can defoliate any branch diameter.
Master Bucker can be tilted to work standing or seated and is designed to add conveyor belts, moreover, its wheels will allow you to easily move the machine anywhere.
Even basic maintenance won't be a problem: Master Bucker is easily disassembled and will only take 10 minutes.

The Top Spinner ROTOR pruner is equipped with a strong and adjustable multi-speed motor. Process all types of crops in a short time and with minimal effort.

TRIMPRO ORIGINAL WET is an effective and silent "leaf trimmer", used to remove excess leaves to cut stems of various types of plants and flowers. The steel blade of this trimmer allows you to cut plants without damaging them. Trimpro Original is equipped with a leaf recovery system and can be easily dismantled.

Let TRIMPRO AUTOMATIK do the work for you.
Equipped with a powerful three-phase motor with speed regulator, 4 height-adjustable blades and a hermetic circular structure that creates a swirling effect, Trimpro Automatik is the fastest and safest way to trim your plants.
To cut, separate the freshly picked flowers from the branches, place them in the container at the top of the machine and follow the instructions for use.

User instructions CLICK HERE

The TRIMBOX WORKSTATION is a special edition of Trimbox with a stainless steel grate that allows for closer cutting. The Workstation can be purchased separately as the Trimbox mounts easily and separately underneath it. Perfect for gardening enthusiasts. To cut, separate the flowers from the branches and move the flowers on the net with your hands, with circular movements.

CenturionPro CG Bucker is defoliator / flower and branch separator can do the job of 2-3 operators and will make over 18 kilos per hour of fully hydrated flowers (8 kg of dried flowers)!
GC1 features a continuous duty cycle and an active gear transmission that allows for greater control and exceptional efficiency, while maintaining high safety.
The GC1 bucker is also equipped with a cleaning system that removes and collects all debris in a vacuum bag, making cleaning a breeze.
The system is easy to install, clean, requires little maintenance and comes with a 2-year warranty.

CenturioPro Bucker HP1 (High Performance) is a powerful defoliator / branch and flower separator, offering 5 different sized holes to accept stems up to approximately 1.9cm (3/4"). This powerful model is capable of cut over 175 lbs of fully hydrated flowers per hour (35 lbs of dried flowers) making it very fast and effective, replacing 7 people.
Combined with the high productivity of the CenturionPro cutting machines, you get the harvesting system most powerful in the world!The HP1 comes complete with a 0.75 HP gear motor with variable speed to provide unsurpassed power
Thanks to the variable speed controls, wet or dry product can be processed easily!

The solidity and stability of the Master Trimmer Standard 50, combined with its height and large surface area, allows not only comfortable work, but the possibility for two operators to work at the same time.
Effective and silent, Master Trimmer Standard is easy to handle and can be easily disassembled for transport. Under the grate, its sharp and height-adjustable tempered steel blades guarantee precision cutting.

TRIMPRO UNPLUGGED is a lightweight yet strong "leaf trimmer" from TrimPro.
It is light, practical, silent, specially designed to be used at home, in growboxes or in any situation that requires discretion.
Crush the flowers gently by placing the leaves in the grate.
An advanced and efficient tool that does not need electricity . The size, weight and shape, together with the reversible cut, contribute to its ideal ergonomics. The leather blades are treated with natural oil to reduce adhesion and maintain flexibility.
The height-adjustable stainless steel blades are of the highest quality on the market, their speed is manually adjustable.

User instructions CLICK HERE

To meet the needs of larger producers, the Trimpro Automatik XL has a capacity to productivity ratio 5 times greater than its brother, the Trimpro Automatik.
The grooved design of the grid facilitates the movement of plants.
In combination with the motor dimmer that regulates the speed of the vortex and the group of 6 adjustable blades in height, the operator always has complete and precise control of the Automatik XL and the finished product.

User instructions CLICK HERE

The Bucker Gentle Cut Triple is a skinner with a smooth cut. That is, it cuts the flowers off the stems, preventing the flowers from breaking into smaller pieces and keeping the structure of the buds intact, thus preserving the appearance of the flower. The Bucker Gentle Cut Triple has three 0.25hp motors, producing more than 10,000 cuts per minute. It is easy to set up, clean and requires little maintenance.
Produces fresh: 60+ kg/h Produces dry: 12+ kg/h Equivalent to 6-9 people Cuts per minute : 10,000
Comes mounted on a Bucker stand with standard industrial wheels.

The solidity and stability of the Master Trimmer Standard 75, combined with its height and large surface area, allows not only comfortable work, but the possibility for two operators to work at the same time.
Effective and silent, Master Trimmer Standard is easy to handle and can be easily disassembled for transport. Under the grate, its sharp and height-adjustable tempered steel blades guarantee precision cutting.

The new TRIMPRO ROTOR was designed and developed at the request of growers looking for a high quality Trimpro product, effective and not harmful to plants.
This machine circulates the flowers on the non-stick grill using leather tabs while cutting them with finely sharpened hardened steel knives.
 Your perfectly clean flowers will gently emerge from the upper cylinder, keeping the machine and production running.
As with all TRIMPRO machines, the height of the blades is adjustable to suit the requirements of each one.
To browse, separate the freshly cut flowers from the branch, place them in the upper container of the machine and follow the instructions.

The Bucker High Performance Single (HP3) is a high performance machine that uses two rollers that push the stem towards the machine and extract the flowers. This allows the Bucker and Dehorn to be continuously fed more efficiently, resulting in the highest hourly output in the industry. The HP3 is the first three-station defoliator, the HP3 accepts wet or dry stems up to 1.9 cm and can produce over 240 kg / h of completely fresh flower. Made of stainless steel and anodized aluminum, it is robust and easy to maintain. The HP3 comes mounted on a Bucker stand with industrial standard wheels.
This powerful defoliator provides unmatched power, adjustability, control and is easy to set up.

The TTT 1600 Hand Crank - by Tom's Tumbler is the original bladeless trimming system. It is undoubtedly the most delicate, effective and fastest trimmer on the market and the best alternative to manual trimming. Save time and money and get quality products hand cut by hand. This is Tom's original and popular crank model, first released in 2013 and updated over the years. Gently and effectively removes small leaves from flowers, preserving their structure, aroma and trichomes. The system cuts dry product only (not for wet cutting if not used with CO2 adapter).

Master Trimmer Pocket is  portable, small and powerful and at the same time very silent.
This machine is very  light and can be easily anchored to any table with a jaw, without the need for screws or holes.
Master Trimmer Pocket  has 2 sharp blades in tempered steel adjustable in height to guarantee a precise cut.
MT Pocket can be able to process up to 4 kg/h, guaranteeing excellent and fast results.

The new TRIMPRO ROTOR was designed and developed at the request of growers looking for a high quality Trimpro product, effective and not harmful to plants. This machine circulates the flowers on the non-stick grill using leather tabs while cutting them with finely sharpened hardened steel knives. Your sparkling clean buds will gently exit the top cylinder, keeping your machine and production running. As with all TRIMPRO machines, the height of the blades is adjustable to suit each one's requirements. To browse, separate the freshly cut flowers from the branch, place them in the top container of the machine and follow the instructions.

User instructions CLICK HERE

The Leaf Trimmer is a very powerful pruning machine with a good value for money! It has a solid stainless steel structure that supports the worktop and the motor. Thanks to this trimmer it is possible to increase the working speed by 6 times compared to manual work.
This machine is specifically designed to cut leaves and roots of plants, including basil, coriander, lavender, mint, etc.

DeBudder is a manual table stemmer, a product designed to be able to work with any size and shape of stem, with a single product you can work your crops without damaging the buds. The DeBudder Edge is the latest innovation to save time and money. The next generation design allows the DeBudder Edge to be securely mounted to the edge of a plastic, wood or metal table.
10 Work Holes.

MT Gentle 50 is designed for growers looking for a machine that works automatically, thanks to its loading container and its food-grade silicone belts, which gently move and rotate the buds on the grid.
Under this, the sharp tempered steel blades with adjustable height ensure precision cutting.
The belts of the Gentle Trimmer are driven by a motor reducer which guarantees constant power, even if the buds are large and heavy or the machine is dirty.
It can be easily disassembled for transport, and both templates can be easily converted to templates